51
E
Seat lock and helmet holder
Opening (fig. 39 and fig. 40)
Insert the key into the seat lock (1) and turn it clockwise
until the seat hook disengages with an audible click.
Slightly raise the rear of the seat (2) and lift it upwards
until it can be extracted.
The helmet cable is in the front part of the underseat
compartment. Pass the cable (A) through the helmet and fit
the ends of the cable into the hook. Leave the helmet
(fig. 40) hanging and refit the seat to secure it.
Warning
This device protects the helmet against theft when the
motorcycle is parked. Do not leave the helmet attached in
this way when riding the motorcycle, as it can interfere with
your movements and cause loss of control of the motorcycle.
The cable should be passed under the subframe from the LH
side. In any other position the cable will interfere with the
seat closure.
2
1
1
1
0
0
fig. 39
A
fig. 40
