
CAUTION!
To avoid damage to your vehicle or tires, observe the
following precautions:
•
Use chains on P225/65R16 tires only. P225/65R17
tires do not provide adequate clearance.
•
Because of restricted chain clearance between tires
and other suspension components, it is important
that only chains in good condition are used. Bro-
ken chains can cause serious damage. Stop the
vehicle immediately if noise occurs that could
indicate chain breakage. Remove the damaged
parts of the chain before further use.
•
Do not exceed 45 mph (70 km/h).
•
Drive cautiously and avoid severe turns and large
bumps, especially with a loaded vehicle.
(Continued)
CAUTION! (Continued)
•
Install chains on the front wheels as tightly as
possible and then retighten after driving about
0.5 mile (0.8 km).
•
Do not drive for prolonged periods of time on dry
pavement.
•
Observe the tire chain manufacturer’s instructions
on the method of installation, operating speed,
and conditions for use. Always use the lower
suggested operating speed of the chain manufac-
turer, if different from the speed recommended by
the vehicle manufacturer.
Always use the lower suggested operating speed if both
the chain manufacturer and vehicle manufacturer sug-
gest a maximum speed. This notice applies to all chain
traction devices, including link and cable (radial) chains.
368 STARTING AND OPERATING