DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
47
create trusted_host network
specified, then there is nothing to prevent any IP address from
accessing the switch, provided the user knows the Username and
Password.
When the access interface is not specified, the trusted host will be
created for all interfaces.
Parameters
<network_address> − IP address and netmask of the trusted host to
be created.
snmp - Specifies trusted host for SNMP.
telnet - Specifies trusted host for TELENT.
ssh - Specifies trusted host for SSH
http - Specifies trusted host for HTTP.
https - Specifies trusted host for HTTPs.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To create the trusted host network.
DES-3526:admin#create trusted_host network
10.62.32.1/16
Command: create trusted_host network
10.62.32.1/16
Success.
show trusted_host
Purpose Used to display a list of trusted hosts entered on the Switch using
the create trusted_host command above.
Syntax
show trusted_host
Description This command is used to display a list of trusted hosts entered on
the Switch using the create trusted_host command above.
Parameters None.
Restrictions None.
Example Usage:
To display the list of trust hosts:
DES-3526: admin#show trusted_host
Command: show trusted_host
Management Stations
IP Address/Netmask Protocol Type
------------------ ------------------------------
Total Entries: 0
DES-3526:admin#
