16
NOTE:
The following happens if either the A or B point is not set:
• If only the A point is set, the B point is automatically set at
the end of the track for which the A point is set.
• If only the B point is set, the A point is automatically set at
the beginning of the track for which the B point is set.
If the playing time of the A-B section is shorter than the total
of the set fade in and fade out times, the fade in and fade out
settings are ignored.
When the B point is before the A point, the section from the B
point to the A point is played.
(3) Playin
a Specific Section of the Disc (
-B Play)
• Use this function to set the play start and end positions and only
play the desired section of the disc.
NOTE: The A-B play mode cannot be set unless the A point, B point
or both the A and B points are set.
