A SERVICE OF

logo

7. Disconnect the camera cable and remove the camera.
Installing the Camera
1. Install the camera in its slot on the display panel.
2. Tighten the screw to secure the camera to the display assembly.
3. Connect the camera cable to the camera.
4. Affix the conductive tape.
5. Install the:
a) display bezel
b) battery
6. Follow the procedures in
After Working Inside Your Computer
.
Removing the LVDS and Camera Cable
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the:
a) SD card
b) ExpressCard
c) battery
d) base cover
e) palmrest
53