A SERVICE OF

logo

Installing the Wireless Local Access Network (WLAN)
1. Insert the WLAN card into its connector at a 45–degree angle into its slot.
2. Tighten the screw to secure the WLAN card to the computer
3. Connect the antenna cables to their respective connectors marked on the WLAN card.
4. Install the:
a) base cover
b) battery
c) ExpressCard
d) SD Card
5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Heat-Sink Fan
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the:
a) SD Card
b) ExpressCard
c) battery
d) base cover
3. Disconnect the heat-sink fan cable.
26