118 Configuration: Disk Groups and Virtual Disks
To change the security key:
1
In the AMW toolbar, select
Storage Array
Physical Disk Security
Change Security Key
.
The
Confirm Change Security Key
window is displayed.
2
Ty p e
yes
in the text field, and click
OK
.
The
Change Security Key
window is displayed.
3
In
Secure key identifier
, enter a string that become part of the secure key
identifier.
You may leave the text box blank, or enter up to 189 alphanumeric
characters without white space, punctuation, or symbols. Additional
characters is generated automatically.
4
Edit the default path by adding a file name to the end of the path or Click
Browse,
navigate to the required folder and enter the name of the file.
5
In
Pass phrase
, enter a string for the pass phrase.
The pass phrase must meet the following criteria:
• It must be between eight and 32 characters long.
• It must contain at least one uppercase letter.
• It must contain at least one lowercase letter.
• It must contain at least one number.
• It must contain at least one non-alphanumeric character (for example,
< > @ +).
The pass phrase that you enter is masked.
6
In
Confirm pass phrase
, re-enter the exact string you entered in
Pass
phrase
.
Make a record of the pass phrase you entered and the security key
identifier it is associated with. You need this information for later secure
operations.
7
Click
Change Key.
8
Make a record of the security key identifier and the file name from the
Change Security Key Complete
dialog, and click
OK
.
book.book Page 118 Wednesday, May 26, 2010 2:14 PM
