A SERVICE OF

logo

Open as PDF
next previous
Installing the Palmrest
1. Align the palmrest to its original position on the computer and press on the positions indicated until it snaps in
place.
2. Connect the following cables to the system board:
a) power button
b) touchpad
c) speaker
d) media board
e) fingerprint
f) RFID
3. Tighten the screws to secure the palmrest to the front of the computer.
4. Tighten the screws to secure the palmrest to the base of the computer.
5. Install the:
a) hard drive
b) optical drive
c) keyboard
d) keyboard trim
e) base cover
f) battery
6. Follow the procedures in
After Working Inside Your Computer
.
Removing the ExpressCard Module
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the:
31