A SERVICE OF

logo

Open as PDF
next previous
Installing the Optical Drive
1. Tighten the screw to secure the drive-latch bracket to the optical drive.
2. Slide the optical drive into its slot and tighten the screw to secure the optical drive to the computer.
3. Install the:
a) battery
b) base cover
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Hard Drive
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the:
a) battery
b) base cover
3. Remove the screws that secure the hard drive to the computer. Slide the hard drive latch to the unlock position and
pull out the hard drive from the computer.
22