A SERVICE OF

logo

Open as PDF
next previous
Back to Contents Page
S-Video Board
Dell™XPS™M1530ServiceManual
Removing the S-Video Board
Replacing the S-Video Board
Removing the S-Video Board
1. Follow the procedures in Before You Begin.
2. Remove the system board (see Removing the System Board).
3. Remove the screw that secures the S-Video board to the system board.
4. Detach the S-Video board from the system board connector.
Replacing the S-Video Board
1. Attach the S-Video board to the system board connector.
2. Replace the screw that secures the S-Video board to the system board connector.
3. Replace the system board (see Replacing the System Board).
4. Replace the wireless sniffer board (see Replacing the Wireless Sniffer Board).
5. Replace the ExpressCard reader (see Replacing the ExpressCard Reader).
6. Replace the optical drive (see Replacing the Optical Drive).
7. Replace the palm rest (see Replacing the Palm Rest).
8. Replace the keyboard (see Replacing the Keyboard).
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the
computer.
1
system board
2
screw
3
S-Video board
4
USB connector
5
S-Video connector
SIM card slot