A SERVICE OF

logo

Open as PDF
next previous
Back to Contents Page
Processor Thermal-Cooling Assembly
Dell™XPS™M1530ServiceManual
Removing the Processor Thermal-Cooling Assembly
Replacing the Processor Thermal-Cooling Assembly
Removing the Processor Thermal-Cooling Assembly
1. Follow the instructions in Before You Begin.
2. Turn the computer upside down and loosen the four captive screws along with the M2.5 x 5-mm screw. Remove the module cover.
3. Loosen the six captive screws along with the M2.5 x 5-mm screw from the thermal-cooling assembly.
CAUTION: Before working inside your computer, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
1
M2.5 x 5-mm screw
2
module cover
3
captive screw (4)
1
thermal-cooling assembly
2
captive screw (6)
3
M2.5 x 5-mm screw