2
Using The System Setup And Boot Manager
NOTE: BIOS Boot Manager is the only supported boot mode.
System Setup enables you to manage your system hardware and specify BIOS-level options.
The following keystrokes provide access to system features during startup:
Keystroke Description
<F2> Enters the System Setup.
<F10> Opens the Dell Lifecycle Controller 2 (LC2). The Dell LC2 supports systems management
features such as firmware updates, hardware configuration, OS deployment, platform restore,
and hardware diagnostics using a graphical user interface. The exact LC2 feature set is
determined by the iDRAC license purchased. For more information, see the Dell LC2
documentation at dell.com/support/manuals.
<F11> Enters the BIOS Boot Manager.
<F12> Starts Preboot eXecution Environment (PXE) boot.
From the System Setup, you can:
• Change the NVRAM settings after you add or remove hardware
• View the system hardware configuration
• Enable or disable integrated devices
• Set performance and power management thresholds
• Manage system security
You can access the System Setup using the:
• Standard graphical browser, which is enabled by default
• Text browser, which is enabled using Console Redirection
To enable Console Redirection, in System Setup, select System BIOS → Serial Communication screen → Serial
Communication, select On with Console Redirection.
NOTE: By default, help text for the selected field is displayed in the graphical browser. To view the help text in the
text browser, press <F1>.
Entering System Setup
1. Turn on or restart your system.
2. Press <F2> immediately after you see the following message:
<F2> = System Setup
If your operating system begins to load before you press <F2>, allow the system to finish booting, and then restart
your system and try again.
15
