Error Code Message Information
Details The processor temperature increased beyond the operational range.
Action Review the logs for fan failures. If no fan failures are detected, check
inlet temperature (if available) and reinstall processor heat sink. If the
problem persists, see Getting Help.
CPU0005
Message CPU <
number
> configuration is unsupported.
Details System is unable to boot or may run in a degraded state.
Action Review the technical specifications for supported processor types.
CPU0010
Message CPU <
number
> is throttled.
Details The CPU is throttled due to thermal or power conditions.
Action Review system logs for power or thermal exceptions.
CPU0023
Message CPU <
number
> is absent.
Action Verify processor installation. If present, re-seat the processor.
CPU0204
Message CPU <
number
> <
name
> voltage is outside of range.
Details Voltages outside the allowable range may damage electrical
components or may cause the system to shutdown.
Action
1. Turn off the system and remove input power for one minute.
2. Ensure the processor is seated correctly.
3. Reapply input power and turn on the system.
4. If the issue persists, see Getting Help.
CPU0700
Message CPU <
number
> initialization error detected.
Details System BIOS was unable to initialize the processor.
Action
1. Turn off the system and remove input power for one minute.
2. Ensure the processor is seated correctly.
3. Reapply input power and turn on the system.
4. If the issue persists, see Getting Help.
CPU0701
Message CPU <
number
> protocol error detected.
Details System event log and operating system logs may indicate that the
exception is external to the processor.
105
