332 Copying
Setting Copy Options
Set the following options for the current copy job before pressing the
(Start)
button to begin copying.
For details about making copies, see "Making Copies From the Document Glass" and "Making Copies From the
DADF."
NOTE: The copy options automatically return to their default status after the auto clear timer is expired.
Options on each tab are below:
•Copy tab
–Output Color
– Select Tray
–Darken / Lighten
–2 Sided Copying
• Quality tab
–Original Type
– Sharpness
– Color Saturation
–Auto Exposure
• Output tab
– Collation
– Reduce / Enlarge
–Original Size
– 2-Up
–Margin
Output Color
To select mode for color or black and white copying:
1
Select
Output Color
.
2
Select
Full Color
or
Black & White
, and then select
OK
.
NOTE: Color copy is secured with a password if the Function Enabled setting for Copy is set to On (Color
Password)
. If you set Output Color to Full Color and the Function Enabled setting for Copy to On
(Color Password)
, you will need to enter the four digit password after pressing the (Start) button.
Select Tray
To select the tray:
1
Select
Select Tray
.
2
Select the desired setting, and then select
OK
.
* Denotes the factory default setting.
MPF The paper is fed from the multipurpose feeder.
Tray1* The paper is fed from tray1.
Tray2 The paper is fed from the optional 550-sheet feeder.
