5
Jack PC Hardware User Manual - Training Department
Revision C 0506
1.1 Safety Instructions
If one of the following situations occurs, be sure to get the product checked by a qualified service
technician:
• The product’s power supply is overheated, damaged, broken, causes smoke
or shortens the mains power socket.
• Liquid penetrates the product case.
• The product is exposed to excessive moisture or water.
• The product has been mechanically damaged.
• The product has obvious signs of breakage or internal loose parts.
• In EU: Installation done not in accordance with EU required standards
• In US: Installation done not in accordance with US required standards
.
Please read the following safety instructions carefully before using the product:
• Be sure not to expose the product to excessive humidity.
•
When using an external power supply, place the DC power cord in such a way to
avoid people stepping on it.
• When using an external power supply, if the product is not used for a long period o
time, it is better to turn off the device by removing the power supply from the mains
socket.
•
The product should be stored and used only in temperature and humidity controlled
environments as defined in the product environmental specifications.
• When using an external power supply (5VDC AC/DC adapter) use only Chip PC-
supplied, UL-listed direct plug in AC/DC adapter
(Chip PC part number: CPN1491 or
CPN1503 or CPN1504).
Using a different power supply might expose the user to
various risks, damage the device and will void the product's warranty!
•
The product is to be installed in compliance with the requirements of the Canadian
electrical Code (CEC) and the National Electrical Code in USA.
