This procedure works the same as the procedure
described previously, but when you lower the Midgate
®
with the rear glass in the stored position, you will
notice that the entire crossbar will lower with the
Midgate
®
. This is completely normal; however, since the
crossbar lowers with the Midgate
®
, it will be heavier.
As you lower the Midgate
®
be ready for the extra weight
and do not let the Midgate
®
fall as you lower it.
Raising the Midgate
®
To return the Midgate
®
to its normal position, raise the
Midgate
®
up with a firm swinging motion until it
latches into place securely. This will help to ensure that
the Midgate
®
closes with enough force to engage
the latches.
If the rear glass is removed and you would like to put it
back, do so using the instructions given previously.
Midgate
®
Lowered with Crossbar Attached
2-21
