SERVSELECT IP VM INSTALLER/USER GUIDE
42
• Press the Up or Down Arrow keys to move the cursor to the target device. Then
press Alt+K to select the Keyboard check box or Alt+M to select the Mouse
check box. Repeat for additional target devices.
2. Click OK to save the settings and return to the Setup window. Click X or press
Escape to return to the Main window.
3. Click Commands. The Commands window opens.
4. Select the Broadcast Enable check box to activate broadcasting. The Broadcast
Enable Confirm/Deny window opens.
5. Click OK to enable the broadcast. Click X or press Escape to cancel and return to the
Commands window.
6. If broadcasting is enabled, type the information or perform the mouse movements
that you want to broadcast from the user station. Only target devices in the list are
accessible. The other user is disabled when broadcast mode is enabled.
To turn broadcasting off, from the Commands window, clear the Broadcast Enable check
box.
