SERVSELECT II™ INSTALLER/USER GUIDE
34
Select Preemptive (default setting) to allow any user to select any server at any time; a
request from another user disconnects the current user without warning.
-or-
Select Cooperative to maintain the current user connection; the current user won t
be disconnected if another user requests connection.
If the Share Enable box is checked, users may share access to a single server. Only
one may be in control at any given time.
To access the Switch dialog box:
1. Press
Print Screen. The Main dialog box will appear.
2. Click Setup - Switch. The Switch dialog box appears.
3. Select either Preemptive or Cooperative as your switch mode.
Figure 4-18. Switch Dialog Box
To enable sharing:
1. Click Share Enable. This allows two users to share a video connection.
2. Type the number of seconds for a sharing time-out (from 10 to 600) to designate
the amount of time that another user has control of the connected port.
