Express Ethernet Switch: LB9017A-R3
6
Product Features
♦ PROVIDES 16 × 10/100MBPS PORTS USING RJ-45 CONNECTORS
♦ A
N OPTIONAL SINGLE-PORT FIBER MODULE ALLOWS:
- 100BASEFX MULTI-MODE FIBER WITH SC, ST, MT-RJ, VF-45 OR LC CONNECTOR
- 100B
ASEFX SINGLE-MODE FIBER WITH SC CONNECTOR
♦ AUTO-NEGOTIATION FOR SPEED AND DUPLEX MODE ON TX PORTS
♦ 16 PORTS: 2K MAC ADDRESSES, 2M BITS BUFFER MEMORY
♦ AUTO-MDIX FOR ALL TX PORTS
♦ STORE-AND-FORWARD MECHANISM
♦ TRUE NON-BLOCKING ARCHITECTURE
♦ FULL WIRE SPEED FORWARDING RATE
♦ BROADCAST STORM FILTERING CONTROL
♦ BACK-PRESSURE AND IEEE 802.3X COMPLIANT FLOW CONTROL
♦ S
YSTEM, IP CONFIGURATION, PORT, PORT-BASED VLAN, AND PORT-BASED TRUNKING
SETTING THROUGH THE
WEB-BASED CONSOLE PORT.
♦ FRONT PANEL PUSH BUTTON TO CHOOSE 100BASEFX OR PORT 16
♦ PRESS THE FRONT PANEL IP RESET PUSH BUTTON FOR FIVE SECONDS TO RESET THE
ETHERNET SWITCH BACK TO THE DEFAULT IP ADDRESS. ( THE PORT, VLAN, AND
TRUNKING SETTINGS WILL REMAIN THE SAME AS WHEN THEY WERE LAST SAVED ).
♦ FRONT PANEL PORT AND POWER STATUS LEDS
♦ STANDARD 19” RACKMOUNT SIZE, ONE-UNIT IN HEIGHT
