A SERVICE OF

logo

Express Ethernet Switch: LB9017A-R3
User’s Manual
15
z Password: Enter a user-defined password and change the factory default password.
<Note> ( Only “ a-z “, “A-Z”, “0-9”, “under line” & “Space” can be acceptable, totally can
not exceed 16 characters ).
z Apply: Click the Apply button and apply the new System settings.
IP Configuration
z Refresh: Click the Refresh button and refresh back to the last saved IP Configurations.
z IP Address, Netmask, Default Gateway: You can see and change the IP Address, Netmask,
and Default Gateway of the Ethernet Switch.
z Apply: Click the Apply button and apply the new IP Configurations.