A SERVICE OF

logo

Chapter 12
12-2 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
default-metric
Command Mode Interface Configuration.
Description Sets the default RIP route metric. The no form of this command restores the
default value. The default setting is 1.
Syntax
Sample Output
The following example sets the default RIP metric value on the interface
labeled “boston” to 10.
(config-if:boston)# default-metric 10
Systems P550R, P580, P880, and P882.
To Configure: default-metric <metric>
To Restore Default: no default-metric
Table 12-1. Parameters, Keywords, Arguments
Name Definition
<metric> The default RIP route metric value. The range is 0 to 15. The
default setting is 1.