Document No. 10-300090, Issue 1 7-13
DVMRP
ip multicast prune-source
Command Mode Interface Configuration.
Description Configures the host address used in DVMRP prune packets forwarded on
this interface. The no form of this command restores the default, which is
host-addr.
Syntax
Sample Output
The following example configures the DVRMP prune packets to the host
address for interface 1.
(configure if:1)# ip multicast prune-source host-addr
Systems P550R, P580, P880, and P882.
To Configure: ip multicast prune-source {host-addr | network-addr}
To Restore
Default:
[no] ip multicast prune-source
Table 7-10. Parameters, Keywords, Arguments
Name Definition
host-addr The full host address is used in the prune packet for the source
address.
network-addr Only the network portion of the address is used in the prune
packet.
