Save these instructions. For your safety, read and understand the information contained within. The owner and
operator shall have an understanding of this product and safe operating procedures before attempting to use this
product. Instructions and Safety information shall be conveyed in the operators native language before use of this
product is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with
the use and misuse of the product. If any doubt exits as to the safe and proper use of this product as outlined in this
factory authorized manual, remove from service until which time it is clear. Inspect before each use. Do not use if
broken, bent, cracked or otherwise damaged parts are noted. If the dolly has been or suspected to have been
subjected to a shock load, discontinue use until checked out by an authorized factory service center. Owners and
operators of this equipment shall be aware that the use and subsequent repair of this equipment may require special
training and knowledge. It is recommended that an annual inspection be done by qualified personnel and that any
missing or damaged parts, decals, warning / safety labels or signs be replaced with factory authorized replacement
parts only. Any dolly that appears to be damaged in any way, is worn or operated abnormally should be removed from
service immediately until such time as repairs can be made.
PRODUCT DESCRIPTION
Atd Tools Wheel Dolly is designed to facilitate the removal and installation of pneumatic tires and wheel assemblies on
trucks, buses and trailers. It is a labor saving device useful in auto shops, bus barns and fleet service.
2
Figure 1- Model Atd-7227 Nomenclature
SPECIFICATIONS
Figure 2- Model Atd-7227 Hydraulic Unit Nomenclature
Jack Handle
Oil Filler Plug
Release Valve
Saddle
Handle
Sleeve
Model Capacity
Hydraulic
Lift
Lifting Range
(L x W x H)
Tilt Range
Weight
Atd-7227
3/4 Ton
(1500 Lbs)
5" 2 1/4" - 11" 43 1/2" x 43" x 34 7/8"
-2.5
o
- 10
o
174
Chain
Rear Caster
Main Frame
Hydraulic
Unit
Handle
Front Caster
Lift Member
Load
Leveler
Atd7227-M0
