36
PRESS ENTER TO SAVE
PRESS ENTER TO TRANFER
SAVE GLOBAL – Page 10
SAVE GLOBAL allows you to save all of the global parameters on the
MPK25, including MIDI Common Channel, LCD Contrast, Pad
Sensitivity, Pad Velocity Curve, Keyboard Transposition, MIDI Clock,
Tap Tempo Average, Preset and SysEx information.
1. While in Global Mode, use [>] button to scroll to Globals (page
10). You will see “Save Setup” displayed on the screen.
2. Press [ENTER] to save all the global settings on the MPK25.
SYSEX TX – Page 11
SYSEX TX allows you to transfer Preset data from the MPK25,
including Controller Numbers, MIDI Channels and various other
parameters via SysEx.
1. While in Global Mode, use [>] button to scroll to SysEx Tx (page
11).
2. Turn the [VALUE] dial to select which Preset’s information you
would like to transfer.
3. Press [ENTER] to save all the global settings on the MPK25.
VERSION – Page 12
VERSION allows you to see what version of the operating system and
firmware is currently loaded onto the MPK25.
While in Global Mode, use [>] button to scroll to Ver (page 12) for
version information.
CHOOSE PRESET
SysEx Transfers to the MPK25
You can also load preset data into the MPK25 from an external
source by “playing” a SysEx file into the MPK25. This can be done
with a variety of SysEx applications, many of which are widely and
freely available over the Internet.
1. Make sure that the device is connected to the MPK25 either
via the USB or the MIDI IN port.
2. Make sure that you are in Preset Mode.
3. “Play” the SysEx file on your external device or computer.
Please note that when transferring SysEx information into the
MPK25, the data will override the data of the original Preset which
was sent to your SysEx editor. For example, if you transfer Preset
5 to your SysEx editor and then send it back to the MPK25, the data
will overwrite Preset 5.
