AGILENT 35670A
Supplemental Operator’s Guide
34
• Enter 4 and press the [ORDERS] softkey (F1).
• Enter 5 and press the [ORDERS] softkey (F1).
• Enter 6 and press the [ORDERS] softkey (F1).
• Enter 7 and press the [ORDERS] softkey (F1).
• Enter 8 and press the [ORDERS] softkey (F1).
• Enter 9 and press the [ORDERS] softkey (F1).
• Enter 10 and press the [ORDERS] softkey (F1).
After the data table is built, it can be saved to disk with the following steps:
• Insert a 3.5” diskette into the AGILENT 35670A
• Press the [Save/Recall] hardkey.
• Press the [SAVE MORE] softkey (F3).
• Press the [SAVE DATA TABL] softkey (F4).
• Press the [ENTER] softkey (F1) to save the data table to the default
filename “DATA1.TBL”
• “DATA1.TBL” can be recalled later to set up the structure of the data
table.
To start taking measurements,
• Press the yellow [Start] hardkey.
Marker Trace: A X Ref: 0
Y Ref: 100 u
Date: 10-02-96 Time: 09:36:00 PM
Entry Label Order Vrms
1 4.797 u
2 837.946 u
3 21.182 u
4 96.302 u
5 21.047 u
6 59.76 u
7 21.843 u
8 154.291 u
9 58.746 u
10 360.559 u
A: CH1 Pwr Spec X:2 Order Y:837.946 uVrms
LogMag
