Filter
Top Products
PERIODIC MAINTENANCE AND MINOR REPAIR
6-11
6
To install the cowling
1. Place the cowling in the original
position, and then install the bolts,
quick fasteners, and quick fastener
screw.
2. Connect the turn signal light lead
coupler.
3. Install cowling A (to complete the
installation of cowling C) or cowl-
ing B (to complete the installation
of cowling D).
EAU39091
Cowling E
To remove the cowling
1. Remove cowling B and panel B.
(See page 6-9.)
2. Unfasten the wire harness by
pressing on the tab to open the
plastic fastener.
3. Remove the bolts and the quick
fastener, and then pull the cowling
off as shown.
1. Cowling D
2. Bolt
3. Turn signal light lead coupler
4. Quick fastener
1. Quick fastener
1. Quick fastener screw
1. Plastic fastener
2. Tab
3. Wire harness
U2C010E0.book Page 11 Wednesday, October 26, 2005 10:19 AM