Yamaha YZFR6V(C) Motorcycle User Manual


 
INSTRUMENT AND CONTROL FUNCTIONS
3-8
3
Coolant temperature display
The coolant temperature display indi-
cates the temperature of the coolant.
Push the RESET button to switch the
coolant temperature display to the air
intake temperature display.
N
O
TE:
When the coolant temperature display
is selected, C is displayed for one
second, and then the coolant tempera-
ture is displayed.
CAUTION:
ECA10020
Do not operate the engine if it is
overheated.
Air intake temperature display
The air intake temperature display indi-
cates the temperature of the air drawn
into the air filter case. Push the RE-
SET button to switch the coolant tem-
perature display to the air intake
temperature display.
NOTE:
Even if the air intake temperature
is set to be displayed, the coolant
temperature warning light comes
on when the engine overheats.
When the key is turned to ON,
the coolant temperature is auto-
matically displayed, even if the air
intake temperature was displayed
prior to turning the key to OFF.
When the air intake temperature
display is selected, A is displayed
before the temperature.
Self-diagnosis devices
This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If any of those circuits are defective, the
engine trouble warning light will come
on, and then the right display will indi-
cate a two-digit error code (e.g., 11, 12,
13).
If the right display indicates any error
codes, note the code number, and then
have a Yamaha dealer check the vehi-
cle.
CAUTION:
ECA11590
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
1. Coolant temperature display 1. Air intake temperature display
U2C010E0.book Page 8 Wednesday, October 26, 2005 10:19 AM