Filter
Top Products
PRE-OPERATION CHECKS
4-3
4
Throttle grip
• Make sure that operation is smooth.
• Check cable free play.
• If necessary, have Yamaha dealer adjust cable free play and lubricate cable and
grip housing.
6-21, 6-31
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
6-30
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
6-28, 6-30
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
6-22, 6-24
Shift pedal
• Make sure that operation is smooth.
• Correct if necessary.
—
Brake pedal
• Make sure that operation is smooth.
• Correct if necessary.
—
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
6-31
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
6-32
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
• Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is defective, have Yamaha dealer check vehicle.
3-22
ITEM CHECKS PAGE
U4C811E0.book Page 3 Thursday, June 7, 2007 2:38 PM