Yamaha YW125B Automobile User Manual


 
1
2
3
4
5
6
7
8
9
6-28
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
Specifi ed fuses:
Main fuse:
20 A
Ignition fuse:
10 A
Signaling system fuse:
15 A
Headlight fuse:
10 A
Fuel injection system fuse:
10 A
TIP
After removing and installing the main
fuse, be sure to turn the main switch
from “ON” to “OFF” three times in
three-second intervals to initialize the
idle speed control system.
3. Turn the key to “ON” and turn on
the electrical circuit in question to
check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
1
1. Spare fuse
2. Remove the blown fuse, and then
install a new fuse of the specifi ed
amperage. WARNING! Do not
use a fuse of a higher amper-
age rating than recommended
to avoid causing extensive
damage to the electrical sys-
tem and possibly a fi re.[EWA15131]
EAU34241
Replacing a headlight bulb
1
1. Headlight
This model is equipped with halogen
bulb headlights. If a headlight bulb
burns out, have a Yamaha dealer re-
place it and, if necessary, adjust the
headlight beam.
6)LQGG 
ࣉࣟࢭࢫࢩ࢔ࣥ ࣉࣟࢭࢫ࣐ࢮࣥࢱࣉࣟࢭࢫ࢖࢚࣮ࣟࣉࣟࢭࢫࣈࣛࢵࢡ