Filter
Top Products
8-32
1
2
3
4
5
6
7
8
9
10
11
Lubricate the steering shaft using a grease gun.
EBU25111
Battery
A poorly maintained battery will corrode and dis-
charge quickly. The electrolyte level, battery lead
connections and breather hose routing should be
checked before each ride and at the intervals
specified in the periodic maintenance and lubrica-
tion chart.
To check the electrolyte level
1. Place the ATV on a level surface.
2. Check the electrolyte level in the battery.
NOTE:
The electrolyte should be between the minimum
and maximum level marks.
3. If the electrolyte is at or below the minimum
level mark, add distilled water to raise it to the
maximum level mark.
Recommended lubricant:
Lithium-soap-based grease
1. Grease nipple
1
1. Battery
2. Battery breather hose
1
2