Filter
Top Products
8-29
1
2
3
4
5
6
7
8
9
10
11
NOTE:
Turning the adjusting bolt in decreases clutch free
play and turning it out increases clutch free play.
5. Tighten the locknut to the specified torque.
NOTE:
When tightening the locknut, hold the adjusting
bolt with a screwdriver so that the adjusting bolt
does not turn together with the locknut.
6. Install the rubber cap securely.
7. Install the left footboard by installing the
screws and bolts, and then tighten the bolts to
the specified torque.
EBU24890
Checking and lubricating the cables
The operation and the condition of all control ca-
bles should be checked before each ride, and the
cables and cable ends should be lubricated if nec-
essary. If a cable is damaged or does not move
smoothly, have a Yamaha dealer check or replace
it.
1. Rubber cap
2. Locknut
3. Adjusting bolt
Tightening torque:
Locknut:
8 Nm (0.8 m·kgf, 5.8 ft·lbf)
1
2
3
Tightening torque:
Footboard bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Recommended lubricant:
Engine oil