Filter
Top Products
8-16
5. Fill the differential gear case with the
specified amount of the recommended
oil.
NOTE:
_
●
Do not exceed the specified differential
gear oil quantity when filling. Overfilling
will cause the oil to seep out of the
breather hose during and after riding.
●
The differential gear oil level cannot be
checked. The differential gear case ca-
pacity is greater than the recommended
oil quantity, therefore the oil level cannot
be accurately checked from the oil filler
cap hole.
_
CAUTION:
_
Be sure no foreign material enters the dif-
ferential gear case.
_
6. Install the oil filler bolt, and then tighten it
to the specified torque.
7. Check for oil leakage. If oil leakage is
found, check for the cause.
Recommended oil:
SAE 80 API GL-4 Hypoid gear oil
Oil quantity:
0.35 L (0.31 Imp qt, 0.37 US qt)
Tightening torque:
Differential gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
EE.book Page 16 Saturday, March 26, 2005 9:48 AM