Filter
Top Products
8-13
3. If the oil is below the brim of the filler hole,
add sufficient oil of the recommended
type to raise it to the correct level.
CAUTION:
_
Be sure no foreign material enters the final
gear case.
_
4. Install the oil filler bolt, and then tighten it
to the specified torque.
Replacing the final gear oil
1. Remove the final gear case cover by re-
moving the bolts.
1. Final gear case cover 2. Bolt (× 2)
2. Place the ATV on a level surface.
3. Place a container under the final gear
case to collect the used oil.
Tightening torque:
Final gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
EE.book Page 13 Saturday, March 26, 2005 9:48 AM