Filter
Top Products
3 Install the screw and oil filler bolt and tighten
to specification.
Transmission oil replacement
1. Place the machine on a level surface.
2. Place a container under the engine.
3. Remove the oil filler bolt and drain bolt to
drain the oil.
4. Install the drain bolt and tighten to specifica-
tion.
8-8
q
Tightening torque:
Screw:
16 Nm (1.6 m0kgf, 11 ft0lbf)
Oil filler bolt:
23 Nm (2.3 m0kgf, 17 ft0lbf)
q
Tightening torque
Drain bolt:
23 Nm (2.3 m0kgf, 17 ft0lbf)
1. Oil filler bolt
1. Drain bolt
5VJ-9-10-3 3/26/02 7:31 PM Page 8-9