Filter
Top Products
4. Make sure the brake cable joint in the equal-
izer is straight when the brake is applied. If
not, loosen the locknut and turn the adjust-
ing nuts at the front brake cables until the
cable joint becomes straight.
5. Tighten the locknut on each brake cable.
8-21
q
w
q
w
1. Locknut (× 2) 2. Adjusting nut (× 2)
q
w
a = a´
a
a´
1. Equalizer 2. Cable joint
5VJ-9-10-3 3/26/02 7:31 PM Page 8-22