Yamaha XVS250 Motorcycle User Manual


 
INSTRUMENT AND CONTROL FUNCTIONS
3-4
3
EAU12342
Handlebar switches
Left
Right
EAU12350
Pass switch “”
Press this switch to flash the headlight.
EAU12400
Dimmer switch /
Set this switch to “” for the high
beam and to “” for the low beam.
EAU12460
Turn signal switch /
To signal a right-hand turn, push this
switch to “”. To signal a left-hand
turn, push this switch to “”. When re-
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
EAU12500
Horn switch “”
Press this switch to sound the horn.
EAU12590
Light switch //
Set this switch to “” to turn on the
auxiliary light, meter lighting and tail-
light. Set the switch to “” to turn on
the headlight also. Set the switch to “”
to turn off all the lights.
EAU12660
Engine stop switch /
Set this switch to “” before starting
the engine. Set this switch to “” to
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
EAU12710
Start switch “”
Push this switch to crank the engine
with the starter.
1. Pass switch “”
2. Dimmer switch /
3. Turn signal switch /
4. Horn switch “”
1. Engine stop switch /
2. Light switch //
3. Start switch “”
5KRE2.book Page 4 Monday, June 23, 2003 3:32 PM