Filter
Top Products
PERIODIC MAINTENANCE AND MINOR REPAIR
6-40
1
2
3
4
5
6
7
8
9
EAU25080
Rear wheel
EAU25470
To remove the rear wheel
WARNING
EWA10820
●
It is advisable to have a Yamaha
dealer service the wheel.
●
Securely support the motorcy-
cle so that there is no danger of
it falling over.
1. Remove the engine guard by re-
moving the bolt.
2. Remove the brake pedal free play
adjusting nut, and then disconnect
the brake rod from the brake cam-
shaft lever.
3. Loosen the axle nut.
4. Turn the drive chain adjusting
plate on each side of the swingarm
fully in direction (a).
5. Lift the rear wheel off the ground
according to the procedure on
page 6-37.
6. Remove the axle nut.
7. Push the wheel forward, and then
remove the drive chain from the
rear sprocket.
NOTE:
The drive chain does not need to be
disassembled in order to remove and
install the wheel.
8. Pull the wheel axle out, and then
remove the wheel.
EAU25791
To install the rear wheel
1. Insert the wheel axle from the
left-hand side.
1. Engine guard
2. Bolt
2
1
1. Brake pedal free play adjusting nut
2. Brake rod
3. Brake camshaft lever
4. Axle nut
5. Chain adjusting plate
1
4
3
5
2
(a)