Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
3-8
1
2
3
4
5
6
7
8
9
EAU13600
Starter (choke) knob “”
Starting a cold engine requires a richer
air-fuel mixture, which is supplied by
the starter (choke).
Move the knob in direction (a) to turn on
the starter (choke).
Move the knob in direction (b) to turn off
the starter (choke).
EAU13981
Seat
To remove the seat
1. Remove panels A and B. (See
page 6-9.)
2. Remove the bolts and pull the seat
off.
To install the seat
1. Insert the projection on the front of
the seat into the seat holder as
shown.
2. Place the seat in the original posi-
tion, and then tighten the bolts.
3. Install the panels.
NOTE:
Make sure that the seat is properly se-
cured before riding.
1. Starter (choke) knob “”
1
(a)
(b)
1. Bolt
1(×2)
1. Projection
2. Seat holder
1
2