Yamaha VT600G Offroad Vehicle User Manual


 
5-7
ESU00035
Parking brake lever
When parking the snowmobile or starting the engine,
apply the parking brake by moving the brake lever
1
to
the left.
To release the parking brake, move the parking brake
lever
1
to the right.
È
To apply the parking brake
É
To release the parking brake
WARNING
@
Always set the parking brake before attempting to
start the engine.
Never run the snowmobile with the parking brake
applied. This may overheat the brake disc and
reduce braking ability.
@
ESU00038
Drive select lever
For VT600 / VX600ER
The drive select lever is used to put the snowmobile into
forward or reverse. After coming to a complete stop, push
the drive select lever down and move it to the desired
direction.
1
Drive select lever
2
Push down
3
Move to FWD
4
Move to REV
CA-02E
CAUTION
:
@
Do not shift from FWD to REV or REV to
FWD while the snowmobile is moving. Otherwise,
the drive system could be damaged.
@
A
B
Snowmobile movement
FWD Forward
REV Reverse
E_8DG.book Page 7 Friday, June 29, 2001 4:20 PM