Maintenance
49
F25TR Electric
T25TR Electric
Starting carburetion system:
Prime start
Valve clearance (cold engine) IN:
0.15–0.25 mm (0.0059–0.0098 in)
Valve clearance (cold engine) EX:
0.25–0.35 mm (0.0098–0.0138 in)
Min. cold cranking amps (CCA/SAE):
245.0 A
Min. marine cranking amps (MCA/ABYC):
323.0 A
Min. reserve capacity (RC/SAE):
52 minutes
Alternator output:
80 W
Alternator output for battery DC:
15.0 A
Drive unit:
Gear positions:
Forward-neutral-reverse
Gear ratio:
F25EH 2.08 (27/13)
F25ER 2.08 (27/13)
F25MH 2.08 (27/13)
F25TR 2.08 (27/13)
T25TR 2.42 (29/12)
Trim and tilt system:
F25EH Manual tilt
F25ER Manual tilt
F25MH Manual tilt
F25TR Power trim and tilt
T25TR Power trim and tilt
Propeller mark:
F25EH F
F25ER F
F25MH F
F25TR F
T25TR G
Fuel and oil:
Recommended fuel:
Regular unleaded gasoline
Min. pump octane:
86
Recommended engine oil:
4-stroke outboard motor oil
Engine oil grade API:
API SE, SF, SG, SH, SJ
Engine oil type SAE:
SAE10W30 or SAE10W40
Lubrication:
Wet sump
Engine oil quantity (excluding oil filter):
F25EH 1.7 L (1.80 US qt) (1.50
Imp.qt)
F25ER 1.7 L (1.80 US qt) (1.50
Imp.qt)
F25MH 1.7 L (1.80 US qt) (1.50
Imp.qt)
F25TR 1.7 L (1.80 US qt) (1.50
Imp.qt)
T25TR 1.9 L (2.01 US qt) (1.67
Imp.qt)
Recommended gear oil:
Hypoid gear oil SAE#90
Gear oil quantity:
F25EH 320.0 cm
3
(10.82 US oz)
(11.29 Imp.oz)
F25ER 320.0 cm
3
(10.82 US oz)
(11.29 Imp.oz)
F25MH 320.0 cm
3
(10.82 US oz)
(11.29 Imp.oz)
F25TR 320.0 cm
3
(10.82 US oz)
(11.29 Imp.oz)
T25TR 430.0 cm
3
(14.54 US oz)
(15.17 Imp.oz)
Tightening torque for engine:
Spark plug:
18.0 Nm (13.3 ft-lb) (1.84 kgf-m)
Propeller nut:
F25EH 35.0 Nm (25.8 ft-lb) (3.57
kgf-m)