Filter
Top Products
46
ADVANCED SETUP MENU
The ADVANCED SETUP menu is displayed in the front
panel display.
y
• During the advanced setup procedure, audio output is muted.
• During the advanced setup procedure, only the STANDBY/
ON, STEREO (EFFECT) and PROGRAM l / h buttons on
the front panel are available for operation.
1 Turn off the power to this unit, and while
holding down STEREO (EFFECT), press
STANDBY/ON.
This unit turns on, and “PRESET” appears in the
front panel display.
2 Press STEREO (EFFECT) repeatedly to
toggle between the available parameters.
3 Press STANDBY/ON to confirm your
selection.
This completes the advanced setup procedure.
The settings you made are reflected the next time this
unit's power is turned on.
■ ADVANCED SETUP menu items
Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening
environment.
Factory presets
PRESET
Use to reset all parameters to the factory presets (see page
53).
Choices:
CANCEL
, RESET
• Select CANCEL if you do not want this unit’s
parameters to be initialized.
• Select RESET if you want all of this unit's parameters
to be initialized.
Note
• This setting does not affect ADVANCED SETUP menu item
parameters.
While holding
down, press
PRESET/TUNING
EDIT
FM/AM A/B/C/D/E
NEXT
PRESET/TUNING
INPUT MODE 6CH INPUT
SET MENU
MEMORY
MAN'L/AUTO FM
TUNING MODE
AUTO/MAN'L MONO
FREQ/TEXT EON
PTY SEEK
MODE START
VOLUME
STEREO PROGRAM INPUT
EFFECT
TONE CONTROL
BASS/TREBLE
STANDBY
/ON
PHONES
SILENT CINEMA
SPEAKERS
A/B/OFF
11,21,3
STEREO
EFFECT
STANDBY
/ON
STEREO
EFFECT
STANDBY
/ON