Filter
Top Products
19
PREPARATION English
Using the basic menu
Use the remote control to make adjustments.
• Press SPEAKERS A/B/OFF on the front panel to select
the front speakers you want to use.
• Make sure you disconnect headphones from this unit.
1 Press SET MENU.
“BASIC MENU” appears on the front panel display.
If the front panel display changes to show anything
other than “BASIC MENU”, press SET MENU until
it displays “BASIC MENU”.
2 Press –/+ to enter into the BASIC menu.
“1 SETUP” appears on the front panel display.
BASIC SYSTEM SETTINGS
The “BASIC” menu allows you to set some of the basic “SOUND” menu parameters with a minimum of effort. If you
wish to configure the unit more precisely to suit your listening environment, use the more detailed parameters from the
“SOUND” menu instead of those under the “BASIC” menu (see page 41 to 44). Altering any parameters in the
“BASIC” menu will reset all parameters in the “SOUND” menu.
LEVEL
SET MENU
MUTE
VOLUME
1
2-4,6
3 Press u / d to change the display to the
setting you want to alter.
1 SETUP
Changes the speaker and amplifier settings to suit the
size of the room you are using. Refer to “Setting the
unit to match your speaker system” on page 21 for
more information.
2 SP LEVEL
Adjusts the output levels of the speakers.
Refer to “SP LEVEL” on page 21 for more
information.
4 Press –/+ to enter the desired setting mode.
5 Change the unit settings to suit your
listening environment.
6 Press u / d to exit from the set menu.
The front panel display changes in the following
order:
SET MENU
BASIC MENU
1 SETUP
↑
BASIC
↓↑
SOUND
↓↑
INPUT
↓↑
OPTION
↓
Exit
Exit