Filter
Top Products
4-19
EBU01002
Auxiliary DC jack
The auxiliary DC jack is located at the front
right side of the ATV. The auxiliary DC jack
can be used for suitable work lights, radios,
etc. The auxiliary DC jack should only be used
when the engine is running.
1. Set the light switch to “OFF”.
2. Start the engine. (See pages 6-1–6-3.)
3. Open the auxiliary DC jack cap, and then
insert the accessory power plug into the
jack.
4. When the auxiliary DC jack is not being
used, cover it with the cap.
1. Auxiliary DC jack 2. Cap
Maximum rated capacity for the auxiliary
DC jack:
DC 12 V, 120 W (10 A)
U5GW13.book Page 19 Tuesday, July 30, 2002 2:23 PM