Filter
Top Products
8-36
6. Put a new headlight bulb into position,
and then secure it in place with the bulb
holder.
7. Install the headlight bulb holder cover.
CAUTION:
_
Make sure the headlight bulb holder cover
is securely fitted over the bulb holder and
seated against the reflector.
_
8. Place the headlight unit in the original po-
sition, and then install the screw.
9. Connect the headlight coupler.
10. Place the headlight unit assembly in the
original position, and then install the
screws.
11. Adjust the headlight beam if necessary.
WARNING
POTENTIAL HAZARD
A headlight bulb is hot when it is on and
immediately after it is turned off.
WHAT CAN HAPPEN
You can be burned, or a fire could start
if the bulb touches something flamma-
ble.
HOW TO AVOID THE HAZARD
Wait for the bulb to cool before touching
or removing it.
U5GW13.book Page 36 Tuesday, July 30, 2002 2:23 PM