Filter
Top Products
SPECIFICATIONS
8-1
8
Dimensions:
Overall length:
2125 mm (83.7 in)
Overall width:
765 mm (30.1 in)
Overall height:
1190 mm (46.9 in)
Seat height:
820 mm (32.3 in)
Wheelbase:
1450 mm (57.1 in)
Ground clearance:
140 mm (5.51 in)
Minimum turning radius:
2900 mm (114.2 in)
Weight:
With oil and fuel:
231.0 kg (509 lb) (U49)
232.0 kg (511 lb) (CAL)
Engine:
Engine type:
Liquid cooled 4-stroke, DOHC
Cylinder arrangement:
Forward-inclined parallel 4-cylinder
Displacement:
998.0 cm³ (60.90 cu.in)
Bore × stroke:
74.0 × 58.0 mm (2.91 × 2.28 in)
Compression ratio:
11.40 :1
Starting system:
Electric starter
Lubrication system:
Wet sump
Engine oil:
Type:
YAMALUBE 4, SAE10W30 or SAE20W40
Recommended engine oil grade:
API service SE, SF, SG type or higher
Engine oil quantity:
Without oil filter cartridge replacement:
2.80 L (2.96 US qt) (2.46 Imp.qt)
With oil filter cartridge replacement:
3.00 L (3.17 US qt) (2.64 Imp.qt)
Cooling system:
Coolant reservoir capacity (up to the
maximum level mark):
0.30 L (0.32 US qt) (0.26 Imp.qt)
Radiator capacity (including all routes):
2.40 L (2.54 US qt) (2.11 Imp.qt)
Air filter:
Air filter element:
Dry element
Fuel:
Recommended fuel:
Unleaded gasoline only
Fuel tank capacity:
21.0 L (5.55 US gal) (4.62 Imp.gal)
Fuel reserve amount:
4.1 L (1.08 US gal) (0.90 Imp.gal)
Carburetor:
Manufacturer:
MIKUNI
Type x quantity:
BSR37 x 4
Spark plug(s):
Manufacturer/model:
NGK/CR9E
Manufacturer/model:
DENSO/U27ESR-N
Spark plug gap:
0.7–0.8 mm (0.028–0.031 in)
Clutch:
Clutch type:
Wet, multiple-disc
Transmission:
Primary reduction system:
Spur gear
Primary reduction ratio:
68/43 (1.581)
Secondary reduction system:
Chain drive
Secondary reduction ratio:
44/16 (2.750)
Transmission type:
Constant mesh 6-speed
Operation:
Left foot operation
10° 30° 50° 70° 90°
110°
0°
130°F
YAMALUBE 4 (10W30)
or SAE 10W30
YAMALUBE 4 (20W40)
or SAE 20W40
–10° 0° 10° 20° 30°
40°
–20°
50°C
U1C210E0.book Page 1 Tuesday, September 21, 2004 1:28 PM