Filter
Top Products
Specifications
76
ESU12466
Dimensions:
Overall length:
FX10 2805 mm (110.4 in)
FX10MTR 3240 mm (127.6 in)
FX10RTR 2805 mm (110.4 in)
Overall width:
FX10 1180 mm (46.5 in)
FX10MTR 1160 mm (45.7 in)
FX10RTR 1180 mm (46.5 in)
Overall height:
FX10 1160 mm (45.7 in)
FX10MTR 1195 mm (47.0 in)
FX10RTR 1140 mm (44.9 in)
Dry weight:
FX10 237.0 kg (522 lb)
FX10MTR 251.0 kg (553 lb)
FX10RTR 236.0 kg (520 lb)
Ski stance:
FX10 1050 mm (41.3 in)
FX10MTR 980 mm (38.6 in)
FX10RTR 1050 mm (41.3 in)
Engine:
Type:
Liquid cooled 4-stroke, 12 valves
Cylinder arrangement:
Backward-inclined parallel 3-cylinder
Displacement:
1049.0 cm³
Bore × stroke:
82.0 × 66.2 mm (3.23 × 2.61 in)
Idling speed:
1450–1550 r/min
Engine oil:
Recommended grade:
API service SG type or higher, JASO
standard MA
Type:
YAMALUBE 4 0W-30, SAE 0W-30
Fuel injection:
Model × quantity:
41EIDW × 2
Manufacturer:
MIKUNI
Fuel:
Type:
REGULAR UNLEADED GASOLINE
ONLY
Minimum pump octane (R+M)/2:
86
Starting system:
Electric starter
Chassis:
Drive track:
Material:
Molded rubber, fiberglass-rod reinforced
Type:
Internal drive type
Width:
381 mm (15.0 in)
Deflection:
FX10 25.0–30.0 mm (0.98–1.18 in)
FX10MTR 30.0–35.0 mm (1.18–1.38 in)
FX10RTR 25.0–30.0 mm (0.98–1.18 in)
Length on ground:
FX10 810 mm (31.9 in)
FX10MTR 1092 mm (43.0 in)
FX10RTR 810 mm (31.9 in)
Rear suspension:
Type:
Slide rail suspension
Track sprocket wheel:
Material:
Polyethylene
Number of teeth:
FX10 9
FX10MTR 7
FX10RTR 9
Transmission:
Clutch type:
Automatic centrifugal engagement
Overall reduction ratio:
FX10 7.06–1.86 :1
FX10MTR 7.60–2.00 :1
FX10RTR 7.06–1.86 :1
Sheave distance:
267.0–270.0 mm (10.51–10.63 in)
Sheave offset:
13.5–16.5 mm (0.53–0.65 in)
Engagement speed (Subject to change
according to elevation settings.):
FX10 3550–3950 r/min
FX10MTR 3300–3700 r/min
FX10RTR 3550–3950 r/min
Shift speed [Subject to change according to
elevation settings. Usually achieved after
approximately 800 m (0.5 mi) traveled.]:
8500–9000 r/min
U8GL11E0.book Page 76 Friday, June 20, 2008 6:51 PM