Yamaha FX10X Offroad Vehicle User Manual


 
Control functions
11
ESU12720
Speedometer unit
The speedometer unit is equipped with the
following:
a digital speedometer (which shows the
riding speed)
an odometer (which shows the total dis-
tance traveled)
a tripmeter (which shows the distance trav-
eled since it was last set to zero)
an engine speed meter (which shows the
engine speed; not for use while riding)
warning indicators (which show self-diag-
nosis, coolant temperature, fuel level, and
oil level warnings)
indicator lights (which show high beam and
low coolant temperature conditions)
a warning light (which shows warnings to-
gether with the warning indicators)
a fuel meter (which shows the fuel remain-
ing in the fuel tank)
a grip/thumb warmer level indicator (which
shows the grip warmer or the thumb warm-
er level)
After the main switch is turned on, the warning
light, the low coolant temperature indicator
light, and all segments of the meter display
turn on and off once.
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
Odometer, tripmeter, and engine
speed meter modes
Pushing the SELECT button switches the
display between the odometer mode ODO,
tripmeter mode TRIP, and engine speed
meter mode r/min.
To reset the tripmeter, push the RESET but-
ton for at least 1 second while the tripmeter is
displayed.
NOTE:
To switch the speedometer, odometer, and
tripmeter displays between kilometers and
miles, select the odometer mode ODO,
1. Warning light “”
2. Self-diagnosis warning indicator “”
3. Two-digit code 84
1. Warning light “”
2. Low coolant temperature indicator light
“”
3. Meter display
1. SELECT button
2. RESET button
U8GL10E0.book Page 11 Friday, May 18, 2007 3:17 PM