Filter
Top Products
Periodic maintenance and adjustment
64
3. If the deflection is incorrect, adjust the
drive track.
Adjusting the drive track
1. Lift the rear of the snowmobile onto a suit-
able stand to raise the drive track off the
ground.
2. Loosen the rear axle nut.
3. Start the engine and rotate the drive track
one or two turns. Stop the engine.
4. Check the drive track alignment with the
slide runners. If the alignment is incorrect,
align the drive track by turning the left and
right adjusting nuts.
1. Drive track deflection
Standard drive track deflection:
FX10 25.0–30.0 mm (0.98–1.18 in)
FX10MTR 30.0–35.0 mm (1.18–1.38
in)
FX10RTR 25.0–30.0 mm (0.98–1.18
in)
1. Rear axle nut
1. Slide runner
Drive track
alignment
Shifted to
right
Shifted to left
Left adjusting
nut
Turn out Turn in
Right adjust-
ing nut
Turn in Turn out
1. Left adjusting nut
2. Right adjusting nut
U8GL11E0.book Page 64 Friday, June 20, 2008 6:51 PM