Yamaha F25 Automobile Parts User Manual


 
Maintenance
85
6. Put a new gasket on the oil level plug.
When the oil begins to flow out of the oil
level plug hole, insert and tighten the oil
level plug.
7. Put a new gasket on the gear oil drain
screw. Insert and tighten the gear oil
drain screw.
EMU29302
Cleaning fuel tank
WARNING
EWM00920
Gasoline is highly flammable, and its va-
pors are flammable and explosive.
If you have any question about properly
doing this procedure, consult your
Yamaha dealer.
Keep away from sparks, cigarettes,
flames, or other sources of ignition
when cleaning the fuel tank.
Remove the fuel tank from the boat be-
fore cleaning it. Work only outdoors in
an area with good ventilation.
Wipe up any spilled fuel immediately.
Reassemble the fuel tank carefully. Im-
proper assembly can result in a fuel
leak, which could result in a fire or ex-
plosion hazard.
Dispose of old gasoline according to lo-
cal regulations.
1. Empty the fuel tank into an approved
container.
2. Pour a small amount of suitable solvent
into the tank. Install the cap and shake
the tank. Drain the solvent completely.
3. Remove the screws holding the fuel joint
assembly. Pull the assembly out of the
tank.
4. Clean the filter (located on the end of the
Recommended gear oil:
Hypoid gear oil SAE#90
Gear oil quantity:
F25A 0.320 L
(0.338 US qt, 0.282 Imp.qt)
F25EA 0.320 L
(0.338 US qt, 0.282 Imp.qt)
F25EHA 0.320 L
(0.338 US qt, 0.282 Imp.qt)
F25MHA 0.320 L
(0.338 US qt, 0.282 Imp.qt)
T25A 0.430 L
(0.455 US qt, 0.378 Imp.qt)
Tightening torque:
9 Nm (0.9 kgf-m, 6.6 ft-lb)
Tightening torque:
9 Nm (0.9 kgf-m, 6.6 ft-lb)
ZMU03274
ZMU02324