Yamaha EAU10080 Motorcycle User Manual


 
INSTRUMENT AND CONTROL FUNCTIONS
3-9
3
EAU14230
Rider seat
To remove the rider seat
1. Release the rider seat backrest by
pushing the levers on the left and
right side as shown, and then slide
the backrest forward.
2. Remove the bolts and screws, and
then pull the rider seat off.
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown.
2. Place the rider seat in the original
position, and then tighten the bolts
and screws.
NOTE:
Make sure that the seat is properly se-
cured before riding.
3. Return the rider seat backrest to
the original position.
1. Opening lever
1. Bolt
2. Screw
1. Projection
2. Seat holder
U5GK15E0.book Page 9 Tuesday, April 13, 2004 3:52 PM